The secret to a crystal clear and safe swimming pool is maintaining good chlorine and pH levels.
pH levels A pH value between 7.2 and 7.6 is generally best for swimming pool water. The pH value is also referred to as the degree of acidity. The pH value is extremely important because certain chemical processes only take place at specific pH values. The pH level should be between 7.2 and 7.6. It is essential to keep the pH level within this range in order for the chlorine level to be maintained. The pH level can be adjusted using the pH min powder included in the Pool Power Mini Starter Kit. Using the scoop provided, follow the instructiona on the label of the jar and dose the pool with the correct amount of powder. BE CAREFUL NOT TO OVERDOSE. Wait 24 hours, and then retest the pool using the strips as instructed.
The adjustment of the pH value is the first step towards crystal-clear, sparkling swimming pool water. You should regularly check the pH value and make adjustments as required. Once the correct pH value has been established, you can start treating the water.
Chlorine Start of use dosage. Fill the pool as per manufacturers instructions. Then use 3 tablets per 1000 litres of water using the floating device included in the Pool Power Mini Starter kit. After this use the test strips provided in the Pool Power Mini Starter Kit to regularly test the chlorine level of the water. The reading should be between 2 and 5ppm.
The chlorine level between this range is essential to prevent harmful bacteria from developing. 1 Mini Quick tablet increases the chlorine content of 1000 litres of water by 1.5 ppm.
